EXFOLIATING BODY SCRUB USING CARBOPOL® ETD 2020 POLYMER
C0063

This mild, gently foaming body scrub includes suspended jojoba beads to exfoliate and cleanse, leaving the skin feeling smoother.

Ingredient /INCI-CTFA Name   Weight, %   Function   Trade Name (Supplier)
PART A            
             
1. Deionized Water   54.88   Diluent    
             
2. Acrylates/C10-30 Alkyl Acrylate Crosspolymer   1.10   Thickener   Carbopol® ETD 2020 (Noveon)
             
3. Triethanolamine (99%)   0.10   Neutralizer    
             
4. Disodium EDTA   0.05   Chelating Agent   Versene® NA (Dow Chemical)
             
PART B            
             
5. Propylene Glycol   1.50   Humectant    
             
6. Diazolidinyl Urea, Propylene Glycol, Methylparaben, Propylparaben   1.20   Preservative   Germaben™ II (Sutton Laboratories)
             
PART C            
             
7. Disodium Laureth Sulfosuccinate   13.00   Surfactant   Mackanate™ EL (McIntyre)
             
8. Disodium Dimethicone Copolyol Sulfosuccinate   5.00   Surfactant   Mackanate™ DC-30(McIntyre)
             
9. Polysorbate 20   1.50   Surfactant   Tween® 20 (ICI Specialties)
             
10.Cocamidopropyl Betaine   3.00   Surfactant   Incronam™ 30 (Croda, Inc.)
             
11. Sodium Laureth Sulfate (3 mole, 30%)   14.00   Surfactant   Standapol® ES-3 (Henkel)
             
PART D            
             
12. Triethanolamine (99%)   1.45   Neutralizer    
             
13. Fragrance   0.22   Fragrance   99411 Fruit Blend (Drom)
             
14. Hydrogenated Jojoba Oil   3.00   Exfoliant   Oasis Verde Florabeads® (Floratech)

PROPERTIES:

Appearance Clear gel with pastel green beads
   
pH 6.0 - 6.5
   
Viscosity* (cP) 7,200 - 8,200
   
Yield Value (dynes/cm2) 300 - 350
   
Clarity** (%T) 50 - 60
*Brookfield RVT @ 20 rpm, 25° C, #5 spindle
**Brinkmann PC 801 Colorimeter, 420 nm

PREPARATION PROCEDURE:

1. Disperse Carbopol® ETD 2020 polymer in deionized water and allow to hydrate.

2. Partially neutralize the dispersion with TEA in PART A; mix until homogenous.

3. Add disodium EDTA and mix until homogenous.

4. Combine ingredients in PART B, and add to PART A; mix until homogenous.

5. Add the surfactants in PART C individually to PART A/B with slow continuous mixing.

6. Add the TEA in PART D to complete the neutralization; mix until homogenous.

7. Add the remaining ingredients individually with continuous, slow mixing.

Rev. 7/14/98 Orig. 5/29/97 2150-94-489

Close This Window and Return to Menu

 
 
The information contained herein is believed to be reliable, but no representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications or the results to be obtained therefrom. The information often is based on laboratory work with small-scale equipment and does not necessarily indicate end product performance or reproducibility. Formulations presented may not have been tested for stability and should be used only as a suggested starting point. Because of the variations in methods, conditions and equipment used commercially in processing these materials, no warranties or guarantees are made as to the suitability of the products for the application disclosed. Full-scale testing and end product performance are the responsibility of the user. Noveon shall not be liable for and the customer assumes all risk and liability of any use or handling of any material beyond Noveon's direct control. The SELLER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Nothing contained herein is to be considered as permission, recommendation, nor as an inducement to practice any patented invention without permission of the patent owner.
  Noveon, Inc., 9911 Brecksville Road, Cleveland, Ohio 44141-3247, 216-447-5000, 800-379-5389
   
  ® Trademark of Noveon, Inc.
™ Trademark of Noveon, Inc.
© Copyright 2001 Noveon, Inc. All rights reserved.